Wednesday, November 2, 2011

MK 500

The MK500 has three programmable function buttons that correspond to Up Arrow, Enter, and Down Arrow from left to right, by default.

Configure these settings remotely using the System Configuration Manager (SCM), or locally on the MK500 using the Control Panel. These settings are saved in the configuration registry file (mkconfig.reg) in the MK500
Application folder to maintain them across cold boot cycles.

Cold Boot

Press and hold reset button on the side of the MK500 for 10 seconds, then release, OR remove and apply power.

Warm Boot
Run the Warmboot application. Select Start > Programs > Warmboot. Alternatively, use the Application Program Interface (API).

Flash: Nonvolatile (Persistent) Memory

The MK500 64 MB configuration has 64 MB of available nonvolatile flash memory. 5 MB is committed for platform partition use to install external driver packs such as RF drivers, and 27 MB is available for developer’s applications within the application partition (folder). The data partition (folder) has no available memory. The data stored in flash memory persists through cold boot cycles.

Download the DCP from the Support Central web site,
https://docs.symbol.com/KanisaPlatform/Publishing/693/12776_f.html?userId=37
http://www.motorola.com/enterprisemobility/support


startup app setting
http://www.steponesystems.com/blog/?p=287

MK500 & MK4000 USB Serial Cable Driver
http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=12711&sliceId=&dialogID=256004784&stateId=1%200%20256006229

2 comments:

  1. If any one need this MK500 / MK590 Software can contact me sonylal85@gmail.com 100% tested and implemented software.

    ReplyDelete